Specification
| Connector | 2x8Pin Connector (IEC60130-9) According to AISG connect type：Male is input Female is output (Male/Female can be input and output) |
||||||
| Hardware Interface | RS485 A/B(5pin , 3pin) Power supply(1pin, 6pin) | ||||||
| Calibrate Time | 30～240 Seconds | ||||||
| Adjustment Time(in all domains) | 10～120 Seconds (typical 40S, Depends different antenna) | ||||||
| ETILT Minimum Resolution | 0.1°C | ||||||
| Motor Output Blocking Torque | Max.12(kgf.cm) | ||||||
| Motor Oput Speed | 50+10%rpm/min | ||||||
| Motor Output Rated Torque | Max.4.5(kgf.cm) | ||||||
| Real-time Data Transfer | Support | ||||||
| Stuck Identification Sensitivity Control |
32 levels | ||||||
| Positive And Negative Control | Support | ||||||
| Output Torque Control | 9 levels | ||||||
| Calibrate Mode | 22 kinds of Modes | ||||||
| Software Version | 2.7.1 | ||||||
| Hardware Version | 2.02 | ||||||
| Max RET Connect | 32pcs | ||||||
| Antenna Specification(update) | Support | ||||||
| Antenna Specification(configure) | Support | ||||||
| Adjustment Cycle Life | 10000 times | ||||||
| Antenna Interface Connecting-rod | ∮6, ∮6.4, ∮7.5, ∮8 Outer hexagonal copper bar and Chrysanthemum head（selectable） |
||||||
