Specification
| Connector | 2x8Pin Connector (IEC60130-9) According to AISG connect type：Male is input Female is output (Male/Female can be input and output) |
|||||||
| Hardware Interface | RS485 A/B(5pin , 3pin) Power supply(1pin, 6pin) DC | |||||||
| Calibrate Time | 30～240 Seconds | |||||||
| Adjustment Time(in all domains) | 10～120 Seconds (typical 40S, Depends different Antenna) | |||||||
| ETILT Minimum Resolution | 0.1°C | |||||||
| Motor Output Rated Torque | Max.4.5(kgf.cm) | |||||||
| Real-time Data Transfer | Support | |||||||
| Stuck Identification Sensitivity Control | 32 levels | |||||||
| Positive And Negative Control | Support | |||||||
| Output Torque Control | 9 levels | |||||||
| Calibrate Mode | 22 kinds of Modes | |||||||
| Software Version | 2.7.1 | |||||||
| Hardware Version | 2.02 | |||||||
| Max RET Connect | 32pcs | |||||||
| Antenna Specification(update) | Support | |||||||
| Antenna Specification(configure) | Support | |||||||
| Adjustment Cycle Life | 10000 times | |||||||
| Antenna Interface Connecting-rod | ∮6, ∮6.4, ∮7.5, ∮8 Outer hexagonal copper bar and Chrysanthemum head(selectable) |
|||||||
